Radon in Franklin County, Virginia
About 1 in 5 homes tested here were at or above the EPA action level.
- Below 2 pCi/L: 50%
- 2 to 4 pCi/L: 29%
- 4 pCi/L or more: 21%
- Median level
- 2.0 pCi/L
- EPA radon zone
- Zone 2
- In Virginia
- 69th of 83
EPA Zone 2, moderate radon potential (predicted average 2 to 4 pCi/L). The EPA zone map dates from 1993 and is meant for planning; high levels are found in every zone.
What to do next
Test your home
Radon levels vary between neighboring houses, so area data can't tell you your own home's level. A short-term test takes 2 to 7 days in the lowest lived-in floor. A long-term test (90 days or more) gives a more reliable average.
If your result is 4 pCi/L or more, fix it
Most homes are fixed with a sub-slab depressurization system: a pipe and a quiet fan that pull radon from under the foundation and vent it above the roof. We're still collecting real installation prices for Virginia.
Use a certified professional
Look for a professional certified by the National Radon Proficiency Program (NRPP) or the National Radon Safety Board (NRSB), or by your state if it certifies radon contractors.
Already tested? Check your result
Next step
How Franklin County compares
Share of homes tested at or above 4 pCi/L, with neighboring counties. Lab data 2008–2017, the only source that covers every state.
| Patrick County | 55% | |
|---|---|---|
| Floyd County | 43% | |
| Pittsylvania County | 38% | |
| United States | 36% | |
| Henry County | 36% | |
| Virginia | 31% | |
| Bedford County | 24% | |
| Roanoke County | 22% | |
| Franklin County | 21% |
Sources
- EPA Map of Radon Zones (public domain).
- CDC Environmental Public Health Tracking Network, radon tests from labs, 2008–2017. Pre-mitigation tests only.
Last updated October 2026. How we calculate these numbers.