Radon in Teton County, Wyoming

About 4 in 10 homes tested here were at or above the EPA action level.

140 home tests, 2008–2017, CDC lab data
  • Below 2 pCi/L: 33%
  • 2 to 4 pCi/L: 23%
  • 4 pCi/L or more: 45%
The line marks the EPA action level, 4 pCi/L.
Median level
3.4 pCi/L
EPA radon zone
Zone 1
In Wyoming
11th of 22

EPA Zone 1, the highest radon potential (predicted average above 4 pCi/L). The EPA zone map dates from 1993 and is meant for planning; high levels are found in every zone.

What to do next

  1. Test your home

    Radon levels vary between neighboring houses, so area data can't tell you your own home's level. A short-term test takes 2 to 7 days in the lowest lived-in floor. A long-term test (90 days or more) gives a more reliable average.

  2. If your result is 4 pCi/L or more, fix it

    Most homes are fixed with a sub-slab depressurization system: a pipe and a quiet fan that pull radon from under the foundation and vent it above the roof. We're still collecting real installation prices for Wyoming.

  3. Use a certified professional

    Look for a professional certified by the National Radon Proficiency Program (NRPP) or the National Radon Safety Board (NRSB), or by your state if it certifies radon contractors.

How Teton County compares

Share of homes tested at or above 4 pCi/L, with neighboring counties. Lab data 2008–2017, the only source that covers every state.

Share of homes tested at or above 4 pCi/L
Lincoln County68%
Fremont County56%
Teton County, ID53%
Sublette County50%
Fremont County, ID50%
Teton County45%
Wyoming43%
Gallatin County, MT43%
Park County43%
Bonneville County, ID40%
United States36%

Sources

Last updated October 2026. How we calculate these numbers.